Morningstar SunSaver SS-10-12v Charge Controller 10A 12V

Morningstar's SunSaverTM is the world's leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller. -- SunSavers technology provides:  Exceptional Reliability  PWM Battery Charging  Consistent High Quality  100% solid state  Series design (not shunt)  True 0 to 100% PWM duty cycle  Setpoint accuracy to 35 mV  Rated for 25% overloads  Fully encapsulated in epoxy potting  Marine rated terminals / anodized case  Temperature compensation  Sealed / Flooded battery select  No need to derate  Parallel for 40 amps or more  Green charging / Red LVD indicators -- Mechanical Specifications:  Wire size #10 AWG (5.2 mm2) - Note: Some #10 spade connectors may not fit terminals  Anodized aluminum case  Marine rated terminals  Epoxy encapsulated  Weight is 8 oz (0.23 kg) -- Electrical Specifications:  12 Volt System  25 Volt Max PV  Rated Solar Input: 10A  Rated Load: 10A  Max array short circuit current 12.5A  25% Current Overload 5 min.  Regulation Voltage: Sealed Battery 14.1 V 28.2 V  Flooded Battery 14.4 V 28.8 V  Temp. Comp. (mV/°C) 28 56  Self-consumption 6 to 10 mA  Operating Temp. 40 to +85ºC -- Reverse Current Protection: The SunSaver prevents the battery from discharging through the PV array at night. There is no need to install a blocking diode for this purpose. -- Noise: The SunSaver circuit minimizes switching noise and filters all noise output to extremely low levels when the system is properly grounded. If noise is present in a telecom load, it is most likely a grounding problem in the system.

• Constant voltage pulse width modulation (PWM) charging

• Epoxy encapsulated electronics ensure durability and longevity

• Includes a temperature compensation sensor

• Rated Solar Current: 10A @ 12V

• Rated Load Current: 10A @ 12V