|
|
|
|
|
|
HomeCooking & Food PrepCast Iron CookwareLodge Signature CookwareFlexible Light Strip 300 SMD Bright White LED Ribbon 5 Meter or 16 Feet By Ledwholesalers, 2026wh |
|
|  | | | Used and New: | | |
| All | |
| $8.95+ $6.99 *Shipping | New | | |
| $12.50Shipping Free | New | | |
| $14.09Shipping Free | Used
- Mint | | |
| $16.99+ $4.49 *Shipping | New | | |
| $22.00Shipping Free | New | | |
| $29.00+ $5.49 *Shipping | New | | |
| $29.95+ $5.49 *Shipping | New | | |
| $45.00+ $5.49 *Shipping | New | | |
| $45.00+ $5.49 *Shipping | New | | |
| $12.50Shipping Free | New | | |
| $246.00+ $5.49 *Shipping | New | | |
| New | |
| $8.95+ $6.99 *Shipping | New | | |
| $12.50Shipping Free | New | | |
| $16.99+ $4.49 *Shipping | New | | |
| $22.00Shipping Free | New | | |
| $29.00+ $5.49 *Shipping | New | | |
| $29.95+ $5.49 *Shipping | New | | |
| $45.00+ $5.49 *Shipping | New | | |
| $45.00+ $5.49 *Shipping | New | | |
| $12.50Shipping Free | New | | |
| $246.00+ $5.49 *Shipping | New | | |
| Used | |
| $14.09Shipping Free | Used
- Mint | | |
| | Customer Reviews: | | | Average Customer Review: ( 35 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
35 of 35 found the following review helpful:
Brighter than expected Nov 16, 2010
By R. Cummings
I initially purchased this item for use in the center console & glovebox of my truck. Now I will be using it for emergency lighting within my home as well. It can be mounted above a door jam, completely hidden (run the wires through the wall), yet provides enough lighting for safety when the power goes off.
I made a few current measurements. 3 LED (minimum strip size) consumes 24 mA. 300 LED (entire 16.4' roll) consumes 1.737 Amps. Each 3 LED section has a 150 Ohm resistor to limit current. A small SLA 12V battery will run a small strip for days/weeks.
Great product, very impressed.
22 of 24 found the following review helpful:
6000K color temperature Apr 11, 2011
By Jeremy Mikesell
For some reason this critical piece of information is nowhere to be found in the description of the product. But the package they arrived in clearly stated a 6k color temperature, this is key product information that should be in the product description.
I have yet to do any thing but plug the spool in to confirm the color temp so for now it's 3 stars based on poor product information.
Update: Now that the listing includes the color temp and I have had a chance to install the lights and use them for a while this is now a 5 star product. I used these for bias lighting on an TV and they work great.
15 of 15 found the following review helpful:
wow, very bright Dec 30, 2010
By Jeff
I bought this along with the 30watt transformer 30 Watt LED Power Supply Driver Transformer 120 to 12 Volt DC Output, 3207 and then I cut the LED strip in 3foot strips and soldered the pieces together with 12v wire and mounted it the ceiling in a shed, about 8x10. I had enough to put under a couple shelves and I was quite surprised when I powered it on, it was very bright. The description doesnt say it comes with an adhesive backing, but it does. It may not be super sticky but works. I would recommend double-sided tape if you mount to the ceiling like I did. I cant wait to find another project to buy another strip.
12 of 13 found the following review helpful:
LED Flex Strip Jul 23, 2011
By clbzonian
I purchased this item from LED Wholesalers with the PWM Dimming Control and 30watt Power Supply Transformer (120v to 12v) to see if this would work as a back-shelf light to brighten a very dark corner. I didn't know a lot about LED flex strips other than what I read online but thought it was a great idea so I took a chance and tried the 16 foot roll.
Although a little bit expensive, I really love this product. It worked out perfectly after I also ordered the LED Strip light connector for each strip that I intended to cut from the 16 foot roll. The LED flex strips are easily cut to length and the connectors are very easy to connect to the ends of the strips. The only problem I encountered was one strip that I connected didn't light up but I just reversed ends and it worked fine (I think that the backing tape was covering the leads on the first try and switching the ends gave me a firm contact). The tape is easily marked where to cut and also labeled positive and negative so even non-electrically inclined people like me shouldn't have a problem.
The only improvement that I would suggest are longer leads on the connectors, but I bought some wire at my local radio shack and spliced in what I needed. I also had to jury-rig my shelf surface so that the tape would stick better (years of pledge and stuff on a very porous surface wouldn't let the tape adhere very well). Since the lights were to be put on the back side of the shelves against the wall I placed a strip of duct tape, stapled this on the shelf and the LED flex strips adhered just great. I saw a trac that works with the flex strips but since I wanted nearly zero clearance the trac wouldn't have worked in this case.
If anyone is thinking of buying this product and cutting to length I suggest ordering enough connectors for each end of lengths you cut if you are putting them in series (one continuous electrical circuit) or one connector for each length if running them non-continously (one left, one right, etc.) from the power source. If you are going to run one continous 16 foot strip (or more) both ends of the roll have leads already on them.
7 of 7 found the following review helpful:
used in a display cabinet Dec 13, 2010
By Marci Beikmann
"coffeepoet"
I purchased this to light a glass display case containing sunglasses. The adhesive backing works perfectly for this application. Easy to hide the light strip, but isn't bad looking where it does show. Very bright, clean look. The 12v inverter can power several strips at once. I want to purchase more, but they are out of stock.
See all 35 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
